Chauvin Arnoux PEL113 Guide De Démarrage Rapide page 7

Indicators and colour
Green indicator
(built into the connector)
Yellow indicator
(built into the connector)
SD MEMORY CARD
The PEL accepts SD, SDHC and SDXC cards, FAT32 formatted, up to a capacity of 32 GB.
The PEL is delivered with a formatted SD card. If you want to install another SD card:
■ Check that the new SD card is not locked.
■ Format the SD card using PEL Transfer (recommended) or using a PC.
■ Open the elastomer cap marked
■ Press on the SD card in the instrument and withdraw it.
Do not withdraw the SD card if recording is in progress.
■ Insert the new card and push it home.
■ Put the elastomer cap back on to keep the instrument waterproof.
INSTALLING PEL TRANSFER
Do not connect the instrument to the PC until you have installed the software and the driver.
■ Download the latest version of PEL Transfer from our web site www.chauvin-arnoux.com.
■ Start setup.exe.
■ Then follow the installation instructions.
For complete installation instructions, refer to the user's manual.
OPENING PEL TRANSFER
■ Connect the voltage inputs of the PEL to mains. The instrument is turned on.
■ Connect the PEL to the PC using the USB cable provided. Wait until the driver is fully installed before continuing.
■ Double-click on the PEL icon
■ Select the Add instrument icon in the toolbar or in the main Instrument menu.
■ Follow the instructions of the Add an instrument
down list, click on the Update button.
■ When the connection with the instrument is established, the name of the instrument should appear on the side left of the
window in the PEL Network branch of the tree.
Ethernet
Indicator off: no activity
Indicator blinking: activity
Ethernet
Indicator off: the stack or the Ethernet controller is not initialized
Slow blinking (once per second): the stack is correctly initialized
Rapid blinking (10 times per second): the Ethernet controller is correctly initialized
Two rapid blinks followed by a pause: DHCP error
Indicator lit: network initialized and ready to be used
.
®
on the desktop to open PEL Transfer.
wizard. If PEL Transfer does not detect the instrument in the pull-
Description