Chauvin Arnoux PEL113 Guide De Démarrage Rapide page 5

QUICK START GUIDE FOR THE PEL112 AND PEL113 (EN)
V1 V2 V3
1000V CAT III
POWER & ENERGY LOGGER
START/STOP
Mains plug.
Selection key.
Press the key and hold it down. The REC and
Release the key while the desired function is lit.
■ If you release it while the REC indicator is lit, recording starts or stops.
■ If you release it while the
N I1 I2
600V CAT IV
PEL 113
POWER & ENERGY LOGGER
REC OL
indicator is lit, Wi-Fi is activated or de-activated.
Measurement terminals
I3
Rigid moulded elastomer housing.
Backlit LCD display unit.
Enter key
Navigation key.
ON/OFF key.
■ To put the instrument into operation, connect the
terminals to mains.
■ To stop the instrument, disconnect the terminals
and press the button for several seconds.
You cannot switch the PEL off while it is connected
to a power source or while recording is in progress
(or pending).
9 indicators providing status information.
USB connector and Ethernet RJ45 and slot for the
SD card.
indicators light one by one, for 3 seconds each.