Publicité
Les langues disponibles
Les langues disponibles
9.4.2. Hanging up
Press the call key
the handset back in the base station or charging
station.
The call time will appear on the display for a few seconds.
NOTE!
If you make a call with a nearly discharged
battery, you will hear a double warning tone
every minute during the call.
End the call, place the handset in the base station and let
the battery charge.
9.5.
Answering the telephone
The assigned ring tone will sound in the event of an
incoming call and the call LED will start to flash.
Pick up the handset to accept the call.
If the handset is not in the base station, press the talk
key
9.5.1. Caller identity function
You can see the telephone number of a caller on the
display (if you have requested the CLIP function from your
telephone provider and if the caller also has a telephone
connection with CLIP function and has not suppressed his
telephone number).
If a caller has been saved in the phone book, the name of
the caller is shown.
9.6.
Switching off the ring tone
Hold down the
appears on the display.
252 / 290
(red) to end the call or place
(green).
hash key until the
symbol
Publicité
