BOMANN KM 1382 CB Mode D'emploi page 50

WARNING: Risk of injury!
The knives on the knife block are sharp. Be careful when
disassembling, cleaning, and assembling the individual parts.
• Remove the blender jug for thorough cleaning.
• Turn the knife block in the direction OPEN from the
blender jug.
• Remove the seal ring from the knife block.
• You can clean the blender jug and the lid with cap in a
bowl of hot water. Afterwards, rinse with clean water and
dry the parts off.
Seal ring and knife block
• Rinse these parts briefly under running water.
• Dry the parts. Then place the seal ring on the knife block.
Place the knife block from below into the blender jug.
Tighten it in the direction LOCK.
Storage
• Clean the appliance as instructed. Ensue that all accesso-
ries are completely dry.
• We recommend that you keep the appliance in the original
packaging if it will not be used for long periods.
• Insert the blade guard on the dicing knife to avoid injury.
• Always store the appliance out of the reach of children in a
dry, well ventilated place.
Troubleshooting
Problem Possible cause
The device is The appliance has
not working. no power supply.
Your appliance
is equipped with
safety switches.
They prevent
accidental motor
start.
The appliance is
faulty.
50
KM1382CB_IM
Model:................................................................... KM 1382 CB
Power supply:............................................. 220 - 240 V~, 50 Hz
Power consumption: ....................................................... 500 W
Protection class: ......................................................................
Net weight (basic appliance with
mixing bowl and kneading tool): ........................approx 2.00 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.
Meaning of the "Dustbin" Symbol
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Remedy
Check the socket
with another appli-
ance.
Plug in the mains
plug correctly.
Check the main
circuit breaker.
Check correct
position of
- the working bowl
- the lid of the
working bowl or
- the blender jug.
Contact our
service center or a
specialist.
Technical Data
Disposal
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that you
will no longer use to the collection points provid-
ed for their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
13.06.16