Télécharger Imprimer la page

RugGear RG160 Guide page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
4.2. Unfasten the battery screws on the battery cover
4.3. Insert the phone battery, aligning the contacts
4.4. Then, place the battery cover and press it down
4.5. Fasten the screws on the battery cover.
Note
5. Charging your phone
5.1. Open the rubber plug on the bottom of the phone.
5.2. Connect the USB cable into the USB port on your
5.3. You must fully charge your phone for 12 houres
6. Caution
4
5
All manuals and user guides at all-guides.com
and lift it carefully to open the comartment.
on the unit with the connectors inside the
compartment.
carefully uintil it locks into place.
Make sure the battery cover, cover screws, earphone
and USB plugs are fi rmly fastened to prevent water
and dust from entering the phone.
Do not remove the USB cable while copying fi les on
USB mode. Exit the USB mode fi rst and then remove
the USB cable to prevent losing data.
phone.
prior to using it for the fi rst time.
It is recommended to use the type of battery
specifi ed by the manufacturer. The use of a
diff erent type may cause the battery to explode.
Dispose of used batteries at directed place.
The normal operating temperature of your phone
is -10 °C to +55 °C.
Do not use the phone at temperatures outside the
range specifi ed.
This device contains magnets that may interfere
with medical devices and equipment.
To avoid hearing impairments, you should not
increase the volume and only use the device with
very high volume for a restricted time.
EN

Publicité

loading