Storage
Refrigerator Storage
GLASS SHELVES
The number of shelves is dependant on the height of the
unit. 34 1/2"
tall models have two shelves and 32 1/2"
(876)
tall models have one.
(826)
To remove or adjust a glass shelf, tilt up, then lift up and
out. To reposition, insert the shelf in the tracks along the
back wall, then lower the front until it locks into position.
Refer to the illustration below.
IMPORTANT NOTE: Use care when handling glass shelves
to prevent breakage or scratching of the interior.
CAUTION
Warm glass shelves to room temperature before
immersing in warm water.
Glass shelf removal
10 | Sub-Zero Customer Care 800.222.7820
REFRIGERATOR DRAWER
To remove, pull the refrigerator drawer forward until it
stops. Lift the front of the drawer slightly and pull straight
out. Refer to the illustration below. To reinstall, engage the
drawer into the side rails and slide back into position.
Drawer removal