Aesculap Exacta GT416 Traduction De La Notice Originale page 17

While the blade set is removed, you can use the
cleaning brush to remove residual hair from inside the
appliance.
Cleaning the appliance
Clean your appliance occasionally with a damp cloth,
then wipe it dry.
Cleaning the charging contacts
If the charging contacts 7 on the appliance or the charg-
ing contacts 3 on the charging unit are dirty, charging
may not be possible or may be interrupted.
Clean the contacts using a cloth or wad of cotton
wool soaked in alcohol or spirit.
If the battery is run down (motor stops), be sure to
switch the On/Off switch to 0 and place the appliance
in the charging unit.
Make sure you do not leave the appliance switched
on when putting it aside if the battery is run down.
Make sure the appliance is switched off (On/ Off
switch to 0) when you place it in the charging unit.
18