Publicité
Les langues disponibles
Les langues disponibles
STARTING/STOPPING THE SNOW SHOVEL
To Start the Snow Shovel (Fig. 6)
1. Install the battery pack.
2. Use both hands to firmly grasp the
front and the rear handles.
3. Press the lock-off button and then
press the trigger switch.
4. Once the machine starts, release the
lock-off button.
5. The rotational speed of the machine
is controlled with the speed button.
See "CHANGING SPEED MODE"
section for more information.
NOTE: The motor starts only when the lock-off button and the trigger is depressed at
the same time.
To Stop the Snow Shovel
Move the snow shovel away from working area and release the trigger to stop the
snow shovel.
WARNING:
breaks and after finishing work.
CHANGING SPEED MODE (Fig. 6 & 7)
The snow shovel features two speed
modes that can be changed during
operation or during breaks.
Slide the speed shifter to change speed
between the low speed "1" and high
speed "2".
NOTICE:
Set the machine to high speed
(2) before leaving it unused for a long
time.
20
56-VOLT LITHIUM-ION CORDLESS 12" SNOW SHOVEL — SNS1200/SNS1200-FC
Always remove the battery pack from the snow shovel during work
6
Speed Shifter
7
Lock-off Button
Trigger Switch
Publicité
