Publicité
Les langues disponibles
Les langues disponibles
level to freeze at that current level. In this situation,
if you turn the rheostat intensity dial, the level on the
screen may not change but the actual intensity from
the receiver/collar will change in agreement with the
dial. In this situation, it is ideal to either wait until your
transmitter is back to working order before emitting a
correction, or while holding the constant button down
slowly turn the Rheostat Intensity Dial while watching
your dog's reaction. Do not turn the Rheostat Intensity
Dial at a rapid increase because the receiver/collar
will emit a static correction based on the level of the
Rheostat Intensity Dial, which might not be correctly
reflected on the LCD screen.
22
9. HOW TO USE THE TEST LIGHT
1. Turn on the receiver/collar and place the test light over
the contact points as shown in the diagram.
2. The test light will illuminate momentarily when the
Nick stimulation button is pressed on the transmitter.
The light will stay lit as long as the Constant button is
pressed on the transmitter, up to 12 seconds.
3. When the stimulation is increased, the test light will
emit a brighter light.
23
Publicité
