1st Dog
2nd Dog
12
1st Dog/2nd Dog Toggle Switch
The 1st Dog/2nd Dog Toggle Switch is on
the left of the Rheostat Dial.
I - 1st Dog
Slide the switch to the left underneath "I"
and press any of the buttons to operate
the first receiver.
II - 2nd Dog
Slide the switch to the right underneath
"II" and press any of the buttons to
operate the second receiver.
3. RECEIVER FITTING
Proper Fit
The receiver should be fitted so that the
medical grade stainless steel contact
points press firmly against the dog's
skin. You should be able to fit two fingers
underneath the collar strap. The best
location is on either side of the dog's
windpipe.
Improper Fit
A loose fit can allow the receiver to move around on the dog's neck. When this happens,
the contact points may rub against the skin and cause irritation. If the receiver is too
loose, the contact will not be consistent and cause the corrections to be inconsistent.
Dogtra uses medical grade stainless steel contact points and anti-microbial plastic to
protect the dog's skin.
13