Beko GN163243XBN Manuel D'utilisation page 20

If the connection cannot be established for
a long period, check your connection set-
tings and refer to the "Troubleshooting"
section provided in the user manual.
Use HomeWhiz application for wireless
connection. You can find the installation
steps in the application during installation.
The installation steps are described on the
application during installation.
You may access the application by reading
the QR code available on the HomeWhiz la-
bel on the product. Application is offered
through App Store for IOS devices, and
through Play Store for Android devices.
Visit https://www.homewhiz.com/ address
for detailed information.
2.Quick Freezing Key
When you press the quick freezing key, the
LED on the key is illuminated and the quick
freezing function will be activated. Freezer
compartment temperature is set to -27
Celsius. Press the key again to cancel the
function. The quick freezing function will be
cancelled automatically. To freeze a large
amount of fresh food, press the quick
freezing key before placing the food in the
freezer compartment.
3. High temperature / fault alert
This indicator will be active when your refri-
gerator cannot perform adequate cooling
or in case of any sensor error. "E" will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These fig-
ures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed for a
while when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning will be removed when the food
is cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automat-
ically and the energy saving symbol lights
up when the door of the product is not
opened or closed for some period of time.
When you activate the energy saving func-
tion, all symbols on the screen other than
the energy saving symbol will be turned off.
When you activate the energy-saving func-
tion, if you press any key or open the door
of the product, the energy saving function
of the refrigerator will be deactivated and
the symbols on the screen will return to
normal. The energy saving function is a
function activated ex-factory and cannot be
cancelled.
5. The Freezer Compartment Temperat-
ure Setting Key
In order to set freezer compartment tem-
perature, press on this key. When you press
on this key, the freezer compartment tem-
perature can be set to
-18,-19,-20,-21,-22,-23,-24 Celsius values.
6. Cooler Compartment Off (Vacation)
Function Key
Press on the key for 3 seconds to activate
the vacation function. Vacation mode is ac-
tivated and the LED on the key is illumin-
ated. "- -" will be displayed on the Cooler
Compartment temperature indicator and
the cooler compartment does not actively
perform cooling. When you activate this
function, it is not suitable to store your food
in the cooler compartment. Other compart-
ments will continue to cool according to
their adjusted temperatures. Press the key
for 3 seconds again to cancel this function.
7. Cooler Compartment Temperature
Setting Key
In order to set cooler compartment temper-
ature, press on this key. When you press on
this key, the cooler compartment temperat-
ure can be set to 8,7,6,5,4,3,2 and 1 Celsius
values.
EN / 20