Publicité
Les langues disponibles
Les langues disponibles
3.
When you hear a click, the battery pack is
installed.
9.2
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button (1).
2.
Remove the battery pack from the machine.
1
9.3
START THE MACHINE
1.
Push the lock-out button (1) and pull the trigger
(2).
English
9.4
STOP THE MACHINE
1.
Release the trigger to stop the machine.
9.5
ADJUST THE LENGTH OF THE
CUTTING LINE
The machine has an auto-feed head. If the cutting
line does not automatically advance, it can be
tangled or empty.
1.
Start the machine and keep 3s. Release the
trigger until the machine totally stops.
2.
Repeat the above step until you can hear the
line-cutting noise.
The line will extend approximately 0.4 in. with each
stop and start of the switch trigger until the line
reaches the cut-off blade and the cut-off blade cuts
the excess length.
Do not pull or release the trigger too fast.
It will damage the machine if you hit the head to try
to advance the line.
9.6
LINE CUT-OFF BLADE
This trimmer is equipped with a line cut-off blade
on the guard. The line cut off blade continuously
trims the line to ensure a consistent and efficient cut
diameter. Advance line whenever you hear the engine
running faster than normal, or when trimming efficiency
diminishes. This will maintain best performance and
keep line long enough to advance properly.
9
1
2
NOTE
NOTE
NOTE
NOTE
EN
Publicité
