Télécharger Imprimer la page

GreenWorks STG311 Manuel D'opérateur page 8

Publicité

Les langues disponibles

Les langues disponibles

EN
3.
Align the screw hole on the wheel with the screw
hole on the trimmer head.
4.
Tighten the screw.
8.4
ATTACH THE AUXILIARY HANDLE
1.
Remove the knob from the auxiliary handle.
2.
Attach the auxiliary handle on the rear handle.
3.
Set the auxiliary handle in the comfortable
position.
English
4.
Put the bolt through the holes.
5.
Tighten the auxiliary handle with the knob.
9
OPERATION
Before you operate the machine, read and
understand the safety regulations and the operation
instructions.
Be careful when you operate the machine and
always observe your surroundings before operating
tool.
9.1
INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1.
Align the ribs on the battery pack with the
grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
8
IMPORTANT
WARNING
WARNING

Publicité

loading