Publicité
Les langues disponibles
Les langues disponibles
4.
Wind the cutting line around the spool tightly in
the indicated direction.
5.
Put the cutting line in the guide slot.
6.
Do not wind the cutting line beyond the edge of
the spool.
11
TRANSPORTATION AND STORAGE
11.1
MOVE THE MACHINE
When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack and charge it.
• Assemble the blade guard.
11.2
STORE THE MACHINE
• Remove the battery pack from the machine.
• Make sure that children cannot come near the
machine.
• Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine
for any damage.
English
12
TROUBLESHOOTING
Problem
Possible
Cause
The ma-
No electrical
chine
contact be-
does not
tween the ma-
start
chine and the
when the
battery pack.
trigger is
pushed.
The battery
pack is deple-
ted.
The lock-out
button and trig-
ger are not
pushed at the
same time.
13
Solution
1. Remove battery
pack.
2. Check contact and
install the battery
pack again.
Charge the battery
pack.
1. Pull the lock-out
button and hold it.
2. Pull the trigger to
start the machine.
EN
Publicité
