VWR Avantor STAR-BEATER Manuel D'instructions page 16

Stopping the milling process:
• Stop the milling operation by pressing the START/STOP key.
Or
• When the milling time elapses, the milling process is automatically ended. The display is
reset to the last set value.
When removing and opening hot milling jars, always wear protective gloves.
There is a danger of burning the hands.
7.3. MILLING JARS FILLING LEVELS
Milling jar volume
1.5 ml
5 ml
10 ml
25 ml
35 ml
50 ml
7.4. REPLACING THE MACHINE FUSES
16
vwr.com I EN Instruction manual VWR
Milling sample
amount
0.5 ml
2 ml
4 ml
10 ml
15 ml
20 ml
The following fuses are required for STAR-BEATER:
2 x T2A 250V.
7
• Unplug mains plug from the mains socket 6.
• By pressing the locking device on the bottom side of the
6
fuse compartment 7, fuse holder is released and you can
pull it out.
• Replace fuses.
• Insert fuse holder and push it, until it locks.
® STAR-BEATER
Max. sample grain
size
1 mm
2 mm
4 mm
6 mm
7 mm
8 mm
Balls max.
diameter
5 mm
10 mm
10 mm
15 mm
20 mm
25 mm