Krüger & Matz KM0815 Mode D'emploi page 24

operational range.
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will
re-enter pairing mode automatically.
• If a connection exist, press and hold
unit for a few seconds to re-activate the pairing mode, the connection will be
interrupted.
• If no other Bluetooth device pairs with this player within two minutes, the player
will recover its previous connection.
• The player will also be disconnected when your device is moved beyond the
operational range.
• If you want to reconnect your device to this player, place it within the operational
range.
• If the device is moved beyond the operational range, when it is brought back,
please check if the device is still connected to the player.
• If the connection is lost, display panel show „NO BT". Follow the instruction
above to pair your device to the player again.
• If the connected Bluetooth device supports Advanced Audio Distribution Profile
(A2Dp), you can listen to the music stored on the device through the player.
• If the device also supports Audio Video Remote Control Profile (AVRCP), you can
use the player's remote control to play music stored on the device.
LINE IN MODE
You can listen to an external audio device through this unit.
1. Ensure that the unit is connected to the TV or audio device.
2. Make sure the unit is turned on. press the ON/OFF/SOURCE button on the
main unit or press the SOURCE button on the remote control repeatedly to
select the LINE IN source.
3. press the VOL+/VOL- buttons to adjust the volume.
4. In LINE IN mode, operate your audio device directly for playback features.
24
/pAIR button on remote control or on
Owner's manual