Setting The Clock - Krüger & Matz KM0815 Mode D'emploi

Select Modes
press the ON/OFF/SOURCE button on the main unit or SOURCE button on the
remote control to select between LINE IN, BLUETOOTH, DAB and FM mode.
Note:
• If there is no signal under the LINE IN and BLUETOOTH mode, the unit will
automatically switch off within 15 minutes.
Set the Sleep Timer
This unit can switch to standby automatically after a set period of time.
1. To activate sleep timer, press the SLEEp button repeatedly to select a set
period of time (in minutes). When the sleep timer is activated, the display show
, the volume will gradually decrease before the unit power off.
2. To deactivate this function, press the SLEEp button repeatedly until [00] is
displayed. When the sleep timer is deactivated,
display.
Adjust the Brightness
Press the DIMMER button repeatedly to select different levels of display brightness.
Adjust the Volume
• press the VOL+/- buttons to adjust the volume level.
• press the MUTE button to mute the sound. press this button again or press the
VOL +/- to cancel the effect.
Select the Equalizer
During music playback, press the EQ button repeatedly to select: pOp, CLASSIC,
ROCk, jAzz, FLAT.

SETTING THE CLOCK

Clock synchronization
1. In the standby mode, press and hold the MENU button on the remote control
and the unit will enter the CLOCk SYNC mode.
2. press the
main unit to switch the clock synchronization modes:
• RDS- synchronize with RDS radio station only
• OFF- turn off the clock synchronization function; manual clock adjustment
3. press the
control to confirm.
Setting the clock manually
1. In STANDBY mode, press and hold the CLOCk button on the remote control or
the SNOOzE/DIMMER button on the main until the hour indicator blinks.
2. Set the hour with
main unit.
20
/ buttons on the remote control or
/pAIR button on the device or the
/ buttons on remote control or
Owner's manual
disappears from the
/ buttons on the
button on the remote
/ buttons on