Publicité
Les langues disponibles
Les langues disponibles
Fig. B
Fig. C
3
Attaching Extension Cord to Trimmer
(Fig. D)
A cord retainer is incorporated into the rear of the handle on
the hedge trimmer.
1. Near the end of the cable, fold the cable to create
a loop.
2. Feed the loop into the cord retainer housing
shown in Fig. D.
3. Hook the loop onto the cord retainer
cord retainer.
4. Plug the cable into the power head.
Fig. D
To Turn the Tool ON (Fig. A)
WARNING:
switch in the ON position.
2
10
11
11
12
as
so it rests in the
7
7
12
Never attempt to lock a
CAUTION:
greater than 3/4" (19 mm). Use the trimmer only
for cutting normal shrubbery around houses and
buildings. NOTE: Power saw can cut stems and
branches up to 1.5" (38.1 mm).
To turn the tool "ON", slide the lock off button
Figure A, backward and, squeeze the trigger switch
the unit is running, you may release the lock off button.
In order to keep the unit running you must continue
to squeeze the trigger. To turn the tool "OFF", release
the trigger.
OPERATION
WARNING:
serious personal injury, turn unit off and
disconnect it from power source before making
any adjustments or removing/installing
attachments or accessories. An accidental start-up
can cause injury.
Proper Hand Position (Fig. E)
WARNING:
personal injury, ALWAYS use proper hand position
as shown.
WARNING:
personal injury, ALWAYS hold securely in anticipation of
a sudden reaction.
Proper hand position requires one hand on the switch
handle
6
and one hand on the bail handle
the unit by the blade guard
2
Fig. E
3
2
Trimming Instructions (Fig. F–J)
DANGER:
Keep hands away from blade
and Power Saw.
WARNING:
observe the following:
English
Do not use blade to cut stems
4
, shown in
5
. Once
To reduce the risk of
To reduce the risk of serious
To reduce the risk of serious
3
. Never hold
.
6
To guard against injury,
5
Publicité
