[(!)] and [CHG] indicators
This chart shows how these indicators flash under certain conditions.
H refers to the length of time that the indicator is ON.
[(!)]
indicator
Flashes slowly
•The unit is on and the LCD is closed or
—.
1 second
the display mode is set to "4 (off)".
Turn the unit off when you have
finished.
Flashes when you press a button
•The unit is in hold mode or "LINE-IN" is
■■■■■■■■■■
on. Release hold mode or press
R
A
1 second
[IN/OUT] to turn off "LINE-IN".
[CHG] indicator
Flashes slowly
• Battery pack charge is low. The unit
hm
wmm
hh
• • •
will turn off after a few minutes.
N
A
1 second
Flashes
•A problem occurred with the battery
..
pack. Confirm the display on the unit's
N
A
1 second
display
(^
page 44).
Note
The following do not indicate malfunction.
•A sound is heard from the AC adaptor during recharging.
•The battery pack warms up after recharging or during use.
• Small parts of the LCD turn black or radiate different colors (this is a peculiarity of the
LCD).
Maintenance
■ To clean this unit, wipe with a soft,
dry cloth.
If the surfaces are extremely dirty, use a
soft cloth dipped in a soap-and-water solu¬
tion or a weak detergent solution.
•Use eyeglass cleaner to remove stubborn
dirt from the LCD.
•Never use alcohol, paint thinner or ben¬
zine to clean this unit.
• Before using chemically treated cloth,
read the instructions that came with the
cloth carefully.
■ Maintenance of the lens
• If dust is attached to the lens, remove
dust carefully with an air blower for cam¬
era lenses (optional).
• Be careful not to touch the lens with your
fingers.
45
ROT5897