Troubleshooting Guide
Problem
Solution
Page
The monitor is dark.
Adjust the brightness.
19
The picture is disrupted
during fast forward and
rewind.
Some disruption is normal.
—
No picture on the monitor
(including video from
another unit).
Check connections.
31
Ensure the video input setting is correct.
•While you are playing a disc "LINE-IN" should be off.
•While you are viewing video from other equipment "LINE-
IN" should be on.
31
Select a picture mode other than "4 (Off)".
19
Ensure the power of the connected equipment is on.
—
Picture doesn't appear on
the television (or the size
of the picture seems
wrong).
Check connections.
32
Check that the television is on.
—
Check that the input mode on the television is correct.
—
Check the settings in "5 TV Aspect".
33
LCD pixels turn black or
radiate different colors.
The LCD is constructed with precision technology so 99.99 %
of the pixels are active, but of the remaining of 0.01 %, there
are pixels that may be black or emit light constantly.
This phenomenon is not a malfunction.
Displays
NO PLAY
The unit cannot play this disc.
8
"bAT Err" and a number
appear on the display.
"bAT Err 1": A problem has occurred with the battery pack.
Consult your dealer.
"bAT Err 2": The pack has been recharging for
12 hours but has failed to recharge for some
reason. Recharge again.
"bAT Err 3": The battery pack has overheated during
recharging. Allow the pack to cool down
before recharging again.
—
Messages do not appear
on the television.
Go to the initial settings menu and turn the On-Screen
Messages on.
28
On-Screen Menu Icons
are cut off or are not
displayed at all.
Go to the initial settings menu and change the position of
the On-Screen Menu Icons.
28
U11
Wipe the disc dean.
9
H □□
□□ stands for a number.
Trouble has occurred. The number appearing after H
depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power source
(AC or battery pack), reconnect the power and turn the unit
on again.
If the service numbers fail to dear, note the service number
and contact a qualified service person.