Panasonic DVD-LV75 Manuel D'utilisation page 38

DVD-LV75
Speaker settings
IdJ-J.MJ-.lIM.I
Turn on this unit and the equipment you have connected.
^ While stopped
I Press [ACTION] or [MENU] to show the initial settings screen.
Use the cursor jockey [A, ▼] to select "7 Speaker Setting" and press
[ENTER].
3
select an item and press [ENTER].
Use the cursor jockey [A, T] to
•Multi-channel
When you have connected 3 or more speakers.
• 2-channel
When you have connected 2 speakers or a
Dolby Pro Logic amplifier.
The initial settings screen is restored if you se¬
lect ''2-channer.
4
5
When you select "Multi-channel"
The screen shown below appears.
Use the following procedure to adjust the settings for
0
.
0
and
0
.
1. Use the cursor jockey [A, ▼, ◄, ►] to select the item and press [ENTER],
2. Use the cursor jockey [A, ▼] to change the setting and press [ENTER].
3. Select "Exit" and press [ENTER],
Press [RETURN] to complete the settings.
■ To return to the previous menu
Press [RETURN].
Note
• If you have used an optical fiber cable to connect this unit
digitally to another unit, make the settings on the other unit.
•The setting is shown on the unit's display when a multi-chan¬
nel disc is being played (■* right).
When set to "Multi-channel"
/ IMTOmix
\.P
When set to "2-channel"
38
Speaker settings screen for Multi-channel
0
Center
0
Center
0
Front (R)
0
Subwoofer
O Subwoofer
0
Surround (R)
O Surround (R)
O uenter
0
Front (L)
Exit
Test signal
0
Surround (L)
Q
Surround fL)
[ Speako Serins f _ 1
nHnrt'irraUlllSar!
A'I
-Texin
tQQ E J fg'sTl
fit
mlail
w
tm® ®
go®-!
Le
1GHI111
:mjfNto >xit_
K3T5897
0
Surround