Bosch 3 601 K72 2 Notice Originale page 8

OBJ_BUCH-1444-003.book Page 12 Wednesday, October 19, 2011 1:58 PM
12 | English
The measuring tool is delivered with a warning label in
English language (marked with the number 15 in the
representation of the measuring tool on the graphic
page).
Do not direct the laser beam at persons or animals and
do not stare into the laser beam yourself. This measur-
ing tool produces laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being blinded.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Technical Data
Digital Laser Rangefinder
Article number
Measuring range
Measuring accuracy (typically)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 50 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without measurement)
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
2 609 140 773 | (19.10.11)
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, and for the calculation of areas
and volumes. The measuring tool is suitable for measuring in-
doors and outdoors.
IP 54 (dust and splash water protected)
GLM 50
Professional
3 601 K72 2..
A)
0.05–50 m
B)
±1.5 mm
1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
35 mm
20 s
5 min
2 x 1.2 V LR03 (AAA)
2 x 1.2 V HR03 (AAA)
D)
10000
D)
2.5 h
0.14 kg
53 x 114 x 30 mm
Bosch Power Tools