Publicité
Les langues disponibles
Les langues disponibles
DISPoSaL
Electronic devices are hazardous waste and do not belong in the household waste.
Dispose of the product at the end of its lifetime, according to the applicable legal regulations.
Remove batteries/rechargeable batteries that may be inserted and dispose of them separately.
trouBLEShootINg
In purchasing the DMM, you have acquired a product which has been designed to the state of the art and is
operationally reliable.
Nevertheless, problems or faults may occur.
for this reason, the following is a description of how you can eliminate possible malfunctions yourself.
Please always observe the safety instructions!
Error
The multimeter
does not work.
No measuring
change.
Repairs other than those described should only be carried out by an authorised specialist.
If you have queries about handling the measuring device contact our technical support.
46
Possible cause
Is the battery dead?
The HOLD function is activated
(display shows „H")
Is the wrong measuring function
active (AC/DC)?
Did you use the wrong measuring
sockets?
Is the fuse defect?
remedy
Check the status.
Press the button „HOLD" again.
The symbol „H" disappears.
Check the display (AC/DC) and
switch the function if applicable.
Check the measuring sockets.
In A/mA/µA range: Change the
fuse as described in the chapter
„Changing the fuse".
Publicité
