Bosch KAD92HBFP Notice De Montage Et D'utilisation page 46

en
2. Keep pressing Options button until "PA" is shown in
the freezer compartment display and "OF" in the
refrigerator compartment display.
3. Press + adjustment button to connect the appliance
to the app.
An animation is shown in the refrigerator
compartment display.
As soon as the refrigerator and the app are
connected, the refrigerator compartment display
shows "On".
4. Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not automatically displayed, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
5. Follow the instructions in the app until the process is
complete.
The freezer compartment display shows "PA" and the
refrigerator compartment display "On".
The refrigerator has been connected to the app.
If the connection has failed, please check whether
the mobile device is connected to the home network
(WLAN).
Then try to establish the connection again.
If "Er" appears on the refrigerator compartment
display, reset the Home Connect settings.
Note
On reset, all Home Connect settings are reset.
Activating the cameras
If your refrigerator is connected to both your home
network (Wi-Fi) and the Home Connect app you can
activate the cameras:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown on the freezer compartment display.
Note
Press both buttons simultaneously. The button
Operation is locked if only the Alarm off/lock button
is pressed for an excessively long period.
2. Press the Options button repeatedly until "CA" is
shown in the freezer compartment display and "OF"
is shown in the refrigerator compartment display.
3. Press the Adjustment button +.
The refrigerator compartment display shows
"On".The cameras are activated.
Note
If the cameras are activated and the refrigerator
contents are interrogated frequently via the app, this will
result in increased data transfer.
Note
Uploading the photos takes up to three minutes.
46
Note
Various external factors in home networks and the
Internet can cause transmission problems and pictures
to be discarded. These have no effect on the
appliance's basic functions.
Deactivating the cameras:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown on the freezer compartment display.
Note
Press both buttons simultaneously. Button Operation
will be locked if the Alarm off/lock button alone
remains pressed for too long.
2. Press the Options button repeatedly until "CA" is
shown in the freezer compartment display and "On"
is shown in the refrigerator compartment display.
3. Press the Adjustment button -.
The refrigerator compartment display shows
"OF".The cameras are disabled.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home Connect
settings can be reset:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously. The button
operation is locked if only the Alarm off/lock button
is pressed for an excessively long period.
2. Keep pressing the Options button until "rE" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
An animation is shown in the refrigerator
compartment display for 15 seconds.
"OF" is subsequently shown in the refrigerator
compartment display.
The Home Connect settings have been reset.
Installing the Home Connect software
update
The refrigerator checks for updates to the Home
Connect software at regular intervals.
If an update is available, "UP" is shown in the
refrigerator compartment temperature display.
Press any button to return the display to the set
temperature.
Installing the update:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously. The button
operation is locked if only the Alarm off/lock button
is pressed for an excessively long period.