Parkside 315586 Traduction Des Instructions D'origine page 28

GB IE
Content
Introduction ............................... 28
Intended Use .............................. 28
General Description .................... 29
Scope of delivery ............................ 29
Overview ....................................... 29
Technical Data ............................ 29
Notes on Safety ......................... 30
Symbols ......................................... 31
General Safety Directions for Power
Tools .............................................. 31
Additional safety instructions ............ 36
Initial Operation ......................... 39
Recharging the battery ..................... 39
Practical tips .............................. 39
Operation .................................. 39
Replacing the appliance attachment .. 39
Switching on/off ............................. 40
Motor unit with drill attachment
PKGA1 .......................................... 40
Motor unit with multisander
attachment PKGA2 .......................... 41
Motor unit with sabre saw
attachment PKGA3 .......................... 42
Motor unit with multifunction
tool PKGA4 .................................... 43
Cleaning/Maintenance ............... 44
Cleaning ........................................ 44
Maintenance .................................. 44
Storage ...................................... 44
Waste Disposal/Environmental
Protection .................................. 44
Guarantee ................................. 45
Repair Service ............................ 46
Service-Center ............................ 46
Importer .................................... 46
Spare Parts/Accessories ............. 47
Trouble Shooting ........................ 48
Translation of the original EC
declaration of conformity ......... 163
Exploded Drawings ...........171-173
28
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a final inspection. The
functionality of your equipment is therefore
guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.
Intended Use
The device is intended for tightening and
releasing screws and for drilling holes in
wood, metal or plastic.
The device is not suitable for commercial
use. Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervision.
The manufacturer is not liable for damages
caused by unspecified use or incorrect
operation.
The device is part of the Parkside X 20 V
TEAM series and can be operated using
X 20 V TEAM series batteries. The batteries
may only be charged using chargers from
the Parkside X 20 V TEAM series.