Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
where <Position no.> is a number from
If, for example, you want to delete the third programmed telephone number (position no. 3), type
Voice Messages Management
The BTEL-GT can record up to 8 voice messages lasting up to 8 seconds each; up to 3 messages can also
be linked consecutively so as to create more complex messages.
Listen to Voice Messagge
To listen to a voice message, type the following keypad sequence:
where <Voice Message no.> is a number from
If you want to stop the message before it ends, press the
Record Voice Message
To record a voice message, type the following keypad sequence:
where <Voice Message no.> is a number from
1. Keep the
key pressed and record the message. Release the
can last up to 8 seconds).
From this moment on, any previous recording made for this message number is ERASED.
2. If you wish, you can record other messages by repeating the procedure from step 1.
To stop recording messages press the
Management Options Calls
Settings for voice calls can be inputted in this section. The dialler is provided from the factory without any
programmed telephone numbers.
Call Handling on Input
When the input is activated, the BTEL-GT can send voice messages to up to 9 telephone numbers. In this section, you
can link the inputs to the phone numbers to call and the voice messages to send. Input no. 4 (L4) can be programmed
to perform the "Block Calls" function (which blocks call cycles and the sending of text messages) instead of making
calls triggered by input. To program, type the following keypad sequence:
where:
<Input no.> is the number of the input being programmed (from
<Telephone Number> is the position of the phone number to call (from
specify the position(s) of the phone number(s). For example, if you want the dialer to call the 3rd, 4th, and 7th
phone numbers, type
On input no. 4 (L4), by pressing the
number, you can enable call blocking. By pressing the
directly without any confirmation messages.
<Voice Message no.> corresponds to the number of the voice messages to be assigned (from
to 3 voice messages can be chosen (for example, messages
(for example
The messages chosen will be played in increasing numerical order: for example if
messages 2, 3, and 1 are selected, they will play in the order 1 - 2 - 3.
32
to
<Voice Message no.>
<Voice Message no.>
<Input no.><Telephone Number>
followed by the
) will be ignored.
.
to
.
to
.
key.
<Voice Message no.>
key to confirm. To disable this feature, press the
key instead of typing the position of a phone
key you return to the previous menu
key.
key to end recording (the message
to
);
to
). Type one or more digits to
); any surplus or repeated numbers
key.
to
). Up
BTEL-GT
Publicité
Chapitres
Table des Matières
