AYA ARIN88E Manuel D'utilisation page 55

REPLACE THE LIGHT BULB
This section applies to units factory equipped with
incandescent lightbulb and selected appliances equipped
with LED lighting with E14 thread.
• Replace the light bulb
1. Set the knob to "OFF", then unplug the appliance.
2. Remove the bulb cover
3. Replace the bulb with one having identical parameters as
the factory installed bulb (E14 thread, 220-240V~, maximum
dimensions: 26 mm diameter, 55 mm length).
4. Replace the bulb cover.
5. Bulbs of a higher or lower power should not be used, only
use bulbs of the specification given above.
Note:
The light bulb must not be used for room illumination.
- 17 -