Samsung HW-S80 D Serie Guide D'utilisation page 6

03 USING THE SOUNDBAR REMOTE CONTROL
How to Use the Remote Control
HW-S80*D
USB port (C-type) for
charging
Turns the Soundbar on and off.
Power
• Auto Power Down Function
The unit turns off automatically in the following situations:
• In TV ARC or eARC / Wi-Fi / Bluetooth mode if there is no audio signal for 18 minutes.
Press to select a source connected to the Soundbar.
• Audio Feedback On/Off
You can turn on or off the Audio Feedback. Press and hold the
Source
seconds while the Soundbar is off (Standby mode).
• Use the Remote less than 6 m
from the product. The usable
distance may vary with the wireless
environmental conditions.
• When the remote control does not
work due to low battery, charge it
by using the USB-C type port.
• The illustration differs with the
respective Remote Control model.
Fire or explosion may occur,
resulting in damage to the
remote control or personal
injury.
• Do not apply shock to the remote
control.
• Be careful not to let foreign
substances such as metal, liquid,
or dust come in contact with the
charging terminal of the remote
control.
• When the remote control is
damaged or you smell smoke or
burning fumes, immediately stop
operation and then repair it at the
Samsung service center.
• Do not arbitrarily disassemble the
remote control.
• Be careful not to let infants or pets
suck or bite the remote control. Fire
or explosion may occur, resulting
in damage to the remote control or
personal injury.
LED indicator
LED indicator
HW-S70*D
SOUNDBAR
Cyan Blinks X1
On
Cyan Blinks X1
On
ENG - 6
Inserting Batteries before using the
Remote Control (AAA batteries X 2)
Slide the back cover in the direction
of the arrow until it is completely
removed. Insert 2 AAA batteries
(1.5V) oriented so that their polarity is
correct. Slide the battery cover back
into position.
Red Blinks X3
Off
(Source) button on the remote control for 5
Red Blinks X1
Off