Samsung HW-S80 D Serie Guide D'utilisation page 12

Manually connecting the Subwoofer
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer is connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds.
• The red indicator at the rear of each speaker turns off and the blue indicator blinks.
HW-S80*D
HW-S70*D
3. Press the Up button on the remote control for 5 seconds.
• The Soundbar will automatically power on when ID SET is complete.
4. Check if the LINK LED is solid blue (connection complete).
HW-S80*D
POWER
LINK LED - Blue is On
Rear of Subwoofer
5 Sec
POWER POWER
Rear of Subwoofer
5 Sec
HW-S70*D
POWER
LINK LED - Blue is On
5 Sec
Rear of Subwoofer
POWER
Rear of Subwoofer
LED
indicator
The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Wireless Subwoofer.
ENG - 12
Blinking
blue fast
Blinking
blue fast
POWER
Red → Green →
Blue Blinks