Samsung HW-S80 D Serie Guide D'utilisation page 15

Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• Only one Samsung TV can be connected at a time.
• Samsung TV that supports Bluetooth can be connected. Check the specifications of your TV.
The initial connection
1.
Bluetooth Pairing button
(OR)
When in "Bluetooth" mode
<HW-S80*D>
<HW-S70*D>
1.
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) → Menu → Settings (
(Bluetooth))
3. Select "Ultra Slim Soundbar" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device list. To connect the Samsung TV to the
Soundbar, select the message, and then establish a connection.
4. You can now hear Samsung TV sound from the Soundbar.
If the device fails to connect
• If you have an existing Soundbar (e.g., Ultra Slim Soundbar) on the list of speakers on the Samsung TV, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Multi Function) /
mode other than "Bluetooth".
• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the
Soundbar for more than 5 seconds while the Soundbar is in "BT" mode.)
Red → Green → Blue Blinks
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
5 Sec
) → All Settings (
(Source) button at the top of the Soundbar or the
Pairing
Ready to connect via Bluetooth.
) → Sound → Sound Output → Bluetooth Speaker List → Ultra Slim Soundbar
(Source) button on the remote control to select the
(Mic On/Off) /
ENG - 15
LED Indicator
Cyan Blinks X3
Connection is complete
(Source) button on the top of the