Intended Use; Product Features; Technical Data - Bosch PKS 55 Notice Originale

16 | English

Intended Use

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Auxiliary handle (insulated gripping surface)
4 Spindle lock button
5 Scale for mitre angle
6 Hex key
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 "CutControl" – Viewing window for cutting line
(PKS 55 A/PKS 55-2 A/PKS 66 A/PKS 66 AF/
PKS 66-2 AF)
10 Parallel guide
11 Retracting blade guard
12 Base plate

Technical Data

Circular Saw
Article number
Rated power input
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
CutControl
Dust/chip box
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Mounting bore
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.36 ohm.
* PKS 66 AF/PKS 66-2 AF with guide rail
1 609 92A 0T4 | (14.10.14)
13 Lever for retracting blade guard
14 Wing bolt for bevel-angle preselection
15 Blade guard
16 Chip ejector
17 Handle (insulated gripping surface)
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Vacuum hose*
24 Deflection tube for chips
25 Dust/chip box*
26 Slider of dust/chip box
27 Clamping lever for cutting-depth preselection
28 Cutting-depth scale
29 Cutting mark, 45°
30 Cutting mark, 0°
31 Guide rail*
32 Button for guide-rail lock
33 Material clamp*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PKS 55
3 603 E00 0..
W 1200
-1
min 5600
mm 55
mm 38

–
–
mm 288 x 153
mm 160
mm 150
mm 1.8
mm 20
kg 3.9
/ II
PKS 55 A PKS 66 A
PKS 55-2 A PKS 66 AF*
PKS 66-2 AF*
3 603 E01 0.. 3 603 E02 0..
1200
5600
55
38



288 x 153 327 x 160
160
150
1.8
20
3.9
/ II
Bosch Power Tools
1600
5000
66
48



190
184
1.8
30
5.4
/ II