Assembly - Wolf Garten HSE 45 V Mode D'emploi

1
Attention! Reverse blade
If the blade become jammed by thick
branches, for example, the hedge shears
must be shut off:
Pull out the power plug.
Do not touch running blades.
Remove the cause of the blockage.
Unplug the power plug from the socket.
Never use the connector cable to pull the plug
out of the socket.
Once the blades are idle, carry the shears by
the hand grips (keeping your hands away form
the blades).
Never carry the device by the connector cable.
After use, make sure the device is stored in a
way that the blades cannot be touched (blade
protection).
Cable
1
Attention! Electric shock through cable
damage
If the cable is cut through or damaged, the
safety fuse does not always trip.
Do not touch the cable before the power
plug is pulled out of the socket.
A damaged cable must be completely re-
placed. Patching the cable with insulat-
ing tape is not permitted.
Avoid bodily contact with grounded parts
such as metal fences.
Repairs to the cable should be performed only
by an expert.
Fasten the connecting cable to the stress relief
mechanism. Do not scrape against corners,
spikes or sharp objects.
Do not squeeze the cable between door jams
or through windows.

Assembly

Attach protective shield
Attach the protective shield as shown.
G
A
Keep cable away from the cutting area.
Switchgears must not be removed or bridged.
Use only extension cable not lighter than rub-
ber hose, type HO 7 RNF, minimum cross
section 3 x 1.5 mm
Cables have to be protected against splashing
water.
Maintenance
1
Attention! Reverse blade
Before all maintenance and cleaning work:
Pull out the power plug.
Do not touch running blades.
Do not spray off the device with water. Do not
use high pressure cleaning or pressurised
steam to clean the device.
Do not store the hedge shears in humid rooms.
For safety reasons, replace worn or damaged
parts.
Repairs must only be performed at a location
staffed by experts.
If the connecting cable is damaged, it must be
replaced at an authorized specialist service
location in order to eliminate hazards.
Use only WOLF original replacement parts.
Otherwise there is no guarantee that the de-
vice will comply with the safety specifications.
Disposal
Power tools do not belong in
household garbage. Bring the the
device, accessories and packaging
to an environmentally-friendly recy-
cling location.
2
, length: max. 25 m.
15