SEM FSED Instructions D'utilisation Et Avis De Montage page 29

SEM 7 (dis. 21)
The appliance was designed to exhaust odors and vapors in the best way. The appliance is to be instal-
led on the outside wall of the house and connected to the cooker-hood which is in the kitchen (fig. 22).
Installation:
the mounting of the appliance is to be made by qualified technicians. Using the appropriate drilling jig
(fig. 23) drill all the holes marked on it into the external wall, by paying attention not to damage water
pipes or power lines. The holes on the wall are to be drilled with a 8 mm. bit.
Insert, step by step, the following parts in the holes drilled:
- the corresponding plastic dowels supplied (fig. 23)
- the two telescopic pipes in the hole of 200 mm.
- the plastic pipe of 40 mm. diameter.
Before leaning the appliance against the wall, please remove the stainless steel carter using the 8
perimetrical screws (fig. 24), then insert the supply cord in the plastic pipe. Fix the appliance without
the stainless steel external body, which was previously removed from the motor block, by matching the
holes of the motor block with the holes on the wall. Tighten with the screws supplied.
Connection of the pipes:
the appliance is endowed with an air entrance to be connected with the telescopic pipes and an air
outlet. After fixing the appliance on the external wall, connect the two telescopic pipes (fig. 25C), which
are placed inside the wall, with the cooker-hood through the flexible pipes.
The fixing operations have to be carried out by using suitable metallic tools (pipes and tools have to be
supplied by the installers).
Electrical connection to the hood:
Connect the the external motor's cable to the terminal board found inside the plastic box of the wiring .
Make sure to respect the colors of cables when performing the electrical connection (fig, 26).
In order to avoid water infiltrations, please apply silicone on the product perimeter, close to the
wall.
Installation of the external carter:
mount the aesthetic carter making sure that the grill will match with the block motor air outlet (dis. 18).
29