SEM FSED Instructions D'utilisation Et Avis De Montage page 26

SEM 1 (dis. 1) - SEM 8 (dis. 1A)
The appliance is designed to exhaust fumes and odours very silently and in the best way. It must be
installed in the house and connected to the cooker-hood, which is in the kitchen (fig. 2).
Types of installation: to make the installation easy, the appliance can be fixed on the wall, on the cei-
ling or on the floor in a horizontal position (fig. 3 ) or vertically (fig. 4) to the fixing level.
Note: in the vertical fixing, the brackets supplied can be used only on the longest side (fig. 6).
Installation of the appliance: after deciding the position and the type of installation, insert the anti-
vibration rubber caps in the holes of the brackets supplied (fig. 5C).
The rubber caps must be put on the sides which are in contact with the wall.
Put the brackets (fig. 5A) on the remote fitted extraction motor by matching its holes with those of the
brackets. Fix with the screws supplied (fig. 5B).
Put the group on the point previously chosen for the installation and mark the points on the wall where
the holes must be drilled.
Insert the dowels supplied in the holes (fig. 6A). Put the remote fitted extraction motor on the wall by
matching the holes of the brackets with the plastic dowels. Screw with the screws supplied (fig. 6B).
Connection of the pipes: the appliance is endowed with an entrance and an outlet to connect the
pipes. Before connecting the exhaust pipes, check the direction of the air showed on the external label
(fig. 7). Connect the pipes and fix them with appropriate metal clamps (exhaust pipes and metal clamps
have to be supplied by the installer). The pipe (fig. 7A) must be connected with the cooker-hood placed
in the kitchen, and the pipe (fig. 7B) must be directed outside the building.
Connect the the external motor's cable to the terminal board found inside the plastic box of the
wiring . Make sure to respect the colors of cables when performing the electrical connection
(fig. 8).
26