Lovibond Tintometer XD 7000 Notice D'utilisation page 4

EN
English
Safety datasheets
4
1.3 Safe operation
1.3.1 Authorized use
The authorized use of the photometer consists exclusively of the carrying out
of photometric measurements according to this operating manual. Any other
use is considered unauthorized.
1.3.2 Requirements for safe operation
Note the following points for safe operation:
 The product may only be operated according to the authorized use
specified above.
 The product may only be supplied with power by the energy sources
mentioned in this operating manual.
 The product may only be operated under the environmental conditions
mentioned in this operating manual.
 The product may not be opened.
1.3.3 Unauthorized use
The product must not be put into operation if:
 it is visibly damaged (e.g. after being transported)
 it was stored under adverse conditions for a lengthy period of time
(storing conditions, see Chapter 8 T
1.4 Handling of hazardous substances
When developing test sets, Tintometer carefully sees that the tests can be
carried out as safely as possible. Some hazards by dangerous substances,
however, cannot always be avoided.
If self-produced tests or solutions are used, the responsibility concerning any
risks caused by those tests or solutions lies with the user (personal
responsibility).
WARNING
Improper handling of certain reagents can cause damage to your
health.
In any case follow the safety labels on the packing and the safety
instructions of the package insert. Protective measures specified there
have to be followed exactly.
The safety datasheets of the chemicals comprise all instructions on safe
handling, occurring hazards, preventive actions and actions to take in
hazardous situations. Follow these instructions in order to work safely.
)
ECHNICAL DATA
ba77194y01
XD 7000
09/2017