Lovibond Tintometer XD 7000 Notice D'utilisation page 7

XD 7000
Key functions
Key
Zero
Esc
START
ENTER
(Arrow keys)
Function keys
ba77194y01 09/2017
The keys on the right side of the keypad have the following functions:
Designation Functions
<ON/OFF> – Switches on and off the photometer
<HOME> – Switches to the main menu from any operating
<PRINT> – Outputs the displayed measured value to an interface.
<STORE> – Saves a displayed measured value or spectrum
<ZERO·BLANK> – Starts one of the following measurements, depending
<TIMER> – Opens the menu, Timer.
<ESC> – Cancels the running action. Entries that have not yet
– Switches to the next higher menu level.
<START·ENTER> – Starts an action (e.g. measurement)
– Opens a selected menu
– Confirms a selection or entry
<><> – Moves the selection in menus and lists one position
<> – Deletes the character left of the cursor during character
– Moves the cursor to the left in a spectrum or
<> – Moves the cursor to the right in a spectrum or
The function keys F1 to F4 have different functions depending on the
operating situation. The current functions are displayed in the function
key menu at the bottom edge of the display (see Section 4.2).
situation. Actions that are not completed are canceled.
on the operating situation:
- Zero adjustment
- Blank value measurement
- Baseline measurement
- User calibration
been accepted are discarded.
up or down
entries
kinetic diagram
kinetic diagram
EN
English
7