Lovibond Tintometer XD 7000 Notice D'utilisation page 11

XD 7000
ba77194y01 09/2017
3.2.3 Switch on the photometer and set the language
When the instrument is switched on during the initial commissioning,
you will be guided to the setting of the instrument language automatically
(<ON/OFF>).
General setup
German
English

Français
Español
Italiano
Bulgarian/Български
Česko
Chinese/ 中文
Traditional Chinese/ 繁
Greek/Ελληνικά
3.2.4 Setting the date and time
During the initial commissioning, the instrument automatically guides you to
the setting of the time and date after the setting of the language.
Date/Time
Date
Time
Date/Time
Date
Time
Date
16 .01.2015
Upon completion of the initial commissioning, you can adjust the
language, data and time at any time in the General setup menu.
1 Select a language with <><>.
16.01.15 9:52
2 Confirm the selected language
with <START·ENTER>.
The language has been set.
The display switches to the setting
of the Date and Time.
The Date/Time menu is open.
16.01.15 9:52
Using <><>, select a menu
16.01.2015
9:52:09
item and confirm or open it with
<START·ENTER>
1 Select and confirm Date.
The input field for the current date
pops up.
OK
2 Enter the current date with <0...9>
16.01.15 9:52
and confirm.
16.01.2015
9:52:09
The input field closes.
The date is accepted.
3 Select and confirm Time.
The input field for the current time
pops up.
4 Set the time also.
OK
EN
English
.
11