HP Color LaserJet Pro 3201 Serie Guide De Référence page 3

Printer features
1 2 3
Front
1 Power button
2 Output tray extender
3 Output tray
4 Control panel
5 Control pad
6
Cartridge access door
Tray 1
7
8 Tray 2
During setup: Help and tips for Wi-Fi connectivity
If the software is unable to find your printer during setup, check the following conditions to reslove
the issue.
Potential Issue
Printer Wi-Fi setup mode timed out
Computer too far from printer
Computer connected to a Virtual Private
Network (VPN) or remote work network
Wi-Fi turned off on computer
(computer connected by Ethernet)
4
5
10
6
9
7
8
Back
9 Power connection
10 Rear door
USB port
11
12 Ethernet port
Solution
Check on-screen instructions to restart wireless
setup mode, if prompted.
Move your computer closer to the printer. Your
computer might be out of range of the printer's
Wi-Fi signal.
Disconnect from a VPN before installing
HP printer software. Connect to the VPN again
after finishing printer setup.
Note: Consider your location and the security
of the Wi-Fi network before disconnecting
from a VPN.
If your computer is connected by Ethernet,
turn on the computer's Wi-Fi while setting up
the printer. You don't need to disconnect the
Ethernet cable from the printer.
11
12
3