Publicité
p.n. 4095595
Italiano
DISPOSITIVI DI TAGLIO CONSIGLIATI
STARK 25 TR
5A. Testina "Batti e vai" Ø 105 mm – 2 fili nylon Ø 2
mm.
STARK 25 D - STARK 25 IC - STARK 25
1. Lama di nylon 8 denti – Ø 9"/230 mm
2. Lama di nylon 4 denti – Ø 9"/230 mm
3. Disco "Pro Trim Universal" 3 lame – Ø 9"/230 mm
4. Disco "Pro Trim Professional" 3 lame – Ø 10" /255
mm
5. Testina "Batti e vai" Ø 105 mm – 2 fili nylon Ø 2
mm
6. Testina "Batti e vai" Ø 130 mm – 2 fili nylon Ø 2.4
mm
7. Testina "Multiline" Ø 2.75"/73 mm – 6 fili quadrati
lato 3 mm
7A. Disco 3 denti Ø 10"/255 1.4 mm, spessore 1.8 mm
8. Disco 3 denti Ø 9"/230 mm, spessore 1.4 mm
9. Disco 4 denti Ø 9"/230 mm, spessore 1.4 mm
ATTENZIONE - L'utilizzo di dispositivi di
taglio non approvati dal costruttore può condurre
a situazioni di pericolo.
16
1.
p.n. 4095596
RECOMMENDED CUTTING DEVICES
5A. "Tap and go" head Ø 105 mm – 2 nylon lines Ø 2
mm
STARK 25 D - STARK 25 IC - STARK 25
1. 8-tooth nylon blade – Ø 9"/230 mm
2. 4-tooth nylon blade – Ø 9"/230 mm
3. "Pro Trim Universal" disc 3-blade – Ø 9"/230
mm
4. "Pro Trim Professional" disc 3-blade – Ø 10"/255
mm
5. "Tap and go" head Ø 105 mm – 2 nylon lines Ø 2
mm
6. "Tap and go" head Ø 130 mm – 2 nylon lines Ø 2.4
mm
7. "Multiline" head Ø 2.75"/73 mm – 6 square
lines 3 mm sides
7A. 3-tooth disk Ø 10"/255, 1.8 mm thickness
8. 3-tooth disk Ø 9"/230 mm, 1.4 mm thickness
9. 4-tooth disk Ø 9"/230 mm, 1.4 mm thickness
WARNING – The use of cutting devices not
authorised by the manufacturer can generate
safety risks.
2.
p.n. 4161567
English
STARK 25 TR
3.
p.n. 4161530
Français
DISPOSITIFS DE COUPE PRÉCONISÉS
STARK 25 TR
5A. Tête "Tap and go" Ø 105 mm – 2 fils nylon Ø 2
mm
STARK 25 D - STARK 25 IC - STARK 25
1. Lame nylon 8 dents – Ø 9"/230 mm
2. Lame nylon 4 dents – Ø 9"/230 mm
3. Disque "Pro Trim Universal" 3 lames – Ø 9"/230
mm
4. Disque " Pro T rim P rofessional" 3 l ames – Ø 1 0"/255
mm
5. Tête "Tap and go" Ø 105 mm – 2 fils nylon Ø 2
mm
6. Tête "Tap and go" Ø 130 mm – 2 fils nylon Ø 2.4
mm
7. Tête "Multiline" Ø 2.75"/73 mm – 6 fils carrés côté
3 mm
7A. Disque 3 dents Ø 10"/255 mm, épaisseur 1.8 mm
8. Disque 3 dents Ø 9"/230 mm, épaisseur 1.4 mm
9. Disque 4 dents Ø 9"/230 mm, épaisseur 1.4 mm
ATTENTION - L'utilisation d'accessoires
de coupe non approuvé par le constructeur peut
entraîner des situations à risque.
4.
Publicité
