Télécharger Imprimer la page

NEFF B 1624 Serie Mode D'emploi page 87

Masquer les pouces Voir aussi pour B 1624 Serie:

Publicité

Les langues disponibles

Les langues disponibles

HydroClean
®
Function selector
The oven cleaning function featured in your oven is
intended to help you keep your oven neat and tidy.
An amount of cleaning solution is vaporised
automatically. The combined effects of heat and
steam soften the soil deposits on the oven wall
enamel and facilitate their removal.
Caution:
Use this function only after the oven has completely
cooled (room temperature).
Use normal water only, and no distilled water.
Activate oven cleaning:
1.
Remove the baking sheet and the universal
baking pan from the oven. The baking grill may
remain in the oven.
2.
Pour approx. 400 ml of water mixed with a little
dishwashing detergent into the floor pan of the oven
cavity.
In the case of heavy soil build-up, you may wish to
allow the cleaning solution to soak in for a while
before you activate the cleaning function.
3.
Close the oven door.
Warning:
The cleaning system can only be activated when
the oven has cooled down completely.
4.
Turn the function selector until "EasyClean"
appears on the display.
(
The
indicator lamp lights up, and "operating"
appears on the display.
When "EasyClean" flashes on the display, the
oven has not cooled down completely.
When EasyClean has ended, an acoustic signal is
emitted, and "Ended" appears on the display.
Switching the oven OFF:
Turn the function selector to the 0 position.
87

Publicité

loading