Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Discharge
Building-in dimensions
EN 14
The extractor hood WU11..PM has 3 extraction settings: up, left or
right. The extractor is as standard used in the up position. Alternatively,
you can also turn the motor to direct the exhaust either left or right:
• Unscrew the 4 screw fasteners of the motor and remove the motor.
• Unscrew the 4 screws from the grill (left or right).
• Place the grill over the top hole and attach it using the 4 screws.
• Place the motor tilted in the side hole and secure it using the
4 screws.
The WU11..PXWU15..PX has 3 extraction settings. 2 connecting pieces
are supplied for this.
• 180 mm round piece for extraction upwards.
• 220 x 90 mm plate for extraction left or right.
If the exhaust is directed to the right or left of the unit, the cover plate
(packed with the unit as a separate item) can be used for sealing the
top exit. The profile (also packed separately) can be bent to meet the
connecting flange for the side exit.
WU11..PM
935
235
45
460
480
WU11..PX
935
125
45
460
480
WU15..PX
320
125
45
1100
1120
720
320
1100
1120
396
1156
1500
1520
700
Publicité
