Publicité
Les langues disponibles
Les langues disponibles
Assembly
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the water tank located at the back of
the machine by pulling down the water tank
handle. Remove the plastic bag containing the
water filter and water filter holder. Clean parts
and accessories (water tank, portafilter, filter
basket, jug) using warm water and a gentle dish
washing liquid. Rinse well then dry thoroughly.
TIP
To easily manoeuvre your machine, use the
drop down swivel foot located under the drip
tray. When turned to UNLOCK, the swivel
foot drops down & lifts the machine upwards,
making it easier to access the removable water
tank or reposition the machine to another
location.
INSTALLING THE WATER FILTER
• Remove the water filter and water filter holder
from the plastic bag.
• Soak the filter in a cup of water for 5 minutes
then rinse under cold running water.
• Wash the filter holder with cold water, taking
specific care to rinse the stainless steel mesh.
Soak filter for 5 minutes
10
Rinse filter & mesh
• Insert the filter into the two parts of the filter
holder.
• To install the assembled filter holder into the
water tank, align the base of the filter holder
with the adapter inside the water tank. Push
down to lock into place.
• Fill the water tank with cold water before
sliding back into position at the back of the
machine and locking into place.
NOTE
DO NOT use highly filtered, demineralized or
distilled water in this machine. This may affect
the taste of the coffee and how the machine
operates.
Place filter into
filter holder
Publicité
