Inoksan BYM 052 N Mode D'emploi page 39

Service menu controls:
P1
(DOWN)
V
Sample usage:
To change NORMAL WASH time,
follow the step respectively as
follows;
1. When the device is close, you can open
device and enter menu by pressing and
holding the buttons "P1-P2-P3" at the same
time and pressing "ON-OFF",
2. Use "P1-P2" orientation
buttons and detect "Y2" display,
3. Press "P3" button and enter
value menu,
4. Press "P1" (+), "P2"(-) buttons
and change NORMAL WASH value
adjusted 85 sec as default,
P2
(UP) Λ OK - SELECT
ON
P3 /OF
F
SAV
E-
EXI
T
5. Save new value by pressing
"P3" (OK) button.
6. To save the changes and exit
press "ON/OFF" button and close
the device.
7. Change is completed, press
"ON/OFF" button, device will start
with new saved parameters.
Restoring factory settings:
When the device is close, press and hold
"START-STOP" and "DISCHARGE"
buttons; on the display "Ft St" letter will
appear.
In that way you reload default
factory settings.
39
discharge