Inoksan BYM 052 N Mode D'emploi page 13

ON button
START <–> PAUSE (2 sn STOP)
Tank Temperature Indicator
Ready led
Lightly dirty Button
Dirty Button
Very Dirty Button
Boiler heat
Rinsing led
Drainage button
ECOMOD work is set to 90 minutes by default. After
90 minutes, it protects itself and becomes disabled. The
area where the boiler temperature is seen rises to 85°C.
ECOMOD operating range can be adjusted between 0-
120 minutes in the factory parameter section.
(OFF when pressed for 2 sec.)
stand-by condition, and green
light will appear when it is on
Green will be on when the
machine is working, and it will
be blinking if paused.
The digit red temperature
indicator. It blinks at the right
bottom when heating is on.
Red will be on when the Boiler
and Tank temperatures are
ready
Red light will appear when
chosen
Red light will appear when
chosen
Red light will appear when
chosen
The digit red temperature
indicator. I It blinks at the right
bottom when heating is on.
Red light appears during
rinsing, the light blinks as the
machine takes water.
Red light will appear during
manual or automatic drainage.
Red light will appear when
chosen
13
Red light sill appear in