Husqvarna 325iL Manuel D'utilisation page 15

To sweep the grass
The airflow from the rotating trimmer cord can be used
to remove cut grass from an area.
1. Hold the trimmer head and its cord parallel to the
ground and above the ground.
2. Apply full speed.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
1857 - 006 - 17.04.2024
Clean the trimmer head
Maintenance
Before you do any
cord to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Push the stop button. (Fig. 34)
3. Push the release buttons on the battery and pull the
battery out. (Fig. 40)
Maintenance schedule
WARNING:
you do maintenance.
The following is a list of the maintenance steps that you
must do on the product.
Remove the battery before
15