Bradley Halo S19214 Serie Mode D'emploi page 9

Installation
Assembly — Connect Base and Eyewash
1
Standard eyewash unit is shown. Other units are similar.
Connect components before securing the base to the floor. When connecting
components, use the rubber grip pad (provided) around pipes to prevent marring.
Apply pipe sealant (supplied by installer) to all male-threaded pipe joints, making
sure not to get any excess over the edge of the pipes.
BSPP = British Standard Pipe Parallel Thread (not available in the U.S.)
Halo unit with
standard drain option
(3) Ø ⁄ " (10mm) holes on
3
8
Ø 8" (203mm) bolt circle
Bradley • 215-1685 Rev. S: ECO 23-05-001A
½" NPT below supply
inlet, or ½" BSPP
Adapter when option
is specified
20½"
(521mm)
pipe length
1¼" NPT drain
outlet or 1-1/4"
BSPP Adapter
when option is
specified
For optional foot pedal
installation, the base
must be positioned so
that the hole in the base
is perpendicular to the
user.
3/8" bolts and anchors
supplied by installer.
Halo unit with 24"
drain option
1/25/2024
S19214
½" NPT below
supply inlet, or ½"
BSPP Adapter
when option is
specified
1¼" NPT
drain outlet
or 1-1/4"
BSPP
Adapter
when option
is specified
12¾"
(324mm)
pipe length
9