Fral FSC25HP.4.3001 Manuel Technique page 32

5.5 Fixed drain connection
EN
5.6 Condensate drain pump connection
6 Maintenance
6.1 Checks to be carried out by the user
6.2 Spare parts
A fixed condensate drain can be connected to the tank.
16mm hose connection.
To connect the condensate drain pump it is necessary to remove the tank and
connect the pump socket to the PIN located inside the compartment.
The only maintenance to be carried out by the user is the cleaning of the air filter, which must
be carried out at least once a month.
The frequency of cleaning can be intensified due to the dustiness of the working environment
of the appliance.
ATTENTION: TO PERFORM THE CLEANING OF THE FILTER, THIS MUST ALWAYS BE
REMOVED FROM THE UNIT.
IT IS FORBIDDEN TO PERFORM CLEANING WITH THE FILTER MOUNTED ON THE UNIT.
The only maintenance to be carried out by the user is the cleaning of the air filter, which must
be carried out at least once a month.
The frequency of cleaning can be intensified due to the dustiness of the working environment
Should it be necessary to replace one or more parts during maintenance by specialized operators,
this must be done using only original spare parts
32 M.FSC25HP.4.3001-01 Manual _ITA_UK_DE_FR_ES - 01/08/2023