Fral FSC25HP.4.3001 Manuel Technique page 30

5.2 Control panel
EN
The units are equipped with a led signalling panel that indicates the operating status of the unit.
Below is a brief description of their meaning.
LED LOW / HIGH: These LEDs indicate the selected ventilation speed.
LED ALARM: This LED if turned on indicates the presence of an alarm. The display will display the error
message.
LED COOL: If this LED lights fixed, it indicates the unit is operating in cooling mode. If it flashes it indicates
that there is no need for cooling, or the machine is defrosting.
LED HEAT: If this LED lights fixed, it indicates the unit is operating in heating mode. If it flashes it indicates
that there is no need for heating, or the machine is defrosting.
LED VENT: When turned on, this LED indicates that the unit is operating in ventilation only.
ON-OFF: Press the ON /OFF button to turn the appliance on and off. Note: When the appliance is turned off
and immediately turned on, the compressor does not start immediately. After 210 seconds, the device
restarts.
FAN-SPEED: Press the FAN SPEED button to select the desired ventilation speed.
30 M.FSC25HP.4.3001-01 Manual _ITA_UK_DE_FR_ES - 01/08/2023