Télécharger Imprimer la page

SilverCrest 331069 2001 Mode D'emploi page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Troubleshooting
If the appliance suddenly stops working:
The appliance has overheated and triggered the
automatic safety cut-out.
Turn the rotary switch 3 to "OFF".
Remove the plug from the wall socket.
Allow the appliance to cool for 25 minutes.
If the appliance has not yet cooled off com-
pletely after 25 minutes, it will not start.
Wait a further 15 minutes and try switching
on again.
If the appliance cannot be switched on.
Check that the plug is correctly connected to
a wall socket.
Check whether the swivel arm 1 is in the
correct position.
Technical data
Input voltage:
Power consumption: 600 W
Protection class:
Max. capacity
Mixing bowl 6:
All parts of this appliance which come into
contact with food are food-safe.
We recommend the following operating times:
When working with the kneading hook 0, whisk
q or beater w, allow the appliance to cool down
for around 25 minutes after 10 minutes of operation.
If you exceed this operating time, the appliance
can overheat and be damaged!
GB │ IE
20 
220 – 240 V ∼
(alternating current),
50 – 60 Hz
II /
(double insulation)
approx. 5 l
Disposal
Never dispose of the appliance
in your normal domestic
waste. This product is subject
to the provisions of European
Directive 2012/19/EU.
Dispose of the appliance through an approved
disposal facility or your municipal waste
facility. Please observe the currently applicable
regulations. Please contact your waste disposal
centre if you are in any doubt.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
The packaging is made from
environmentally friendly material and
can be disposed of at your local
recycling plant.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The
packaging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites.
SKM 600 A1

Publicité

loading

Ce manuel est également adapté pour:

Skm 600 a1339191 2001339204 2001339205 2001