SilverCrest SDW 1200 C1 Instructions D'utilisation Et Consignes De Sécurité page 18

Protect the power cord against
¾
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .
Operation
The product must not be left
¾
unattended while it is connected
to the supply mains .
Do not move the product while it
¾
is in operation .
Do not place the product on hot
¾
plates (gas, electric, coal cooking
range etc .) . Operate the product
on a level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while it
¾
is in use or shortly after use, when
it is still hot .
Make sure that the power cord
¾
is not pinched by the plates or
touches the rim of the plates .
The use of extension cords is not
¾
recommended .
If the use of an extension cord is
necessary, it must be designed for
a current flow of at least 10 A .
Lay cords in such a way that
¾
they may not be tripped over or
otherwise damaged .
The product is not intended to be
¾
operated by means of an external
timer or separate remote-control
system .
Cleaning and storage
m WARNING! Risk of injury!
Disconnect the product from the
power supply before cleaning
work and when not in use .
Do not store the hot product in a
¾
cupboard or in the packaging .
Do not pull the power plug out of
¾
the electrical outlet by the power
cord .
Protect the product, its power
¾
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
GB/IE 19